As temperatures soar and the electricity required to keep these buildings cool mounts, an uncomfortable question is emerging: in the pursuit of architectural modernity, has India forgotten how to build for its own climate?
Could the answer lie in the architectural traditions that India once considered old-fashioned?
According to the Bureau of Energy Efficiency (BEE), buildings already account for more than 30 percent of India's total electricity consumption. The country is constructing an estimated 300,000 square feet of commercial floor space every day. More significantly, 40 percent of the building stock that will exist over the next two decades is yet to be built.
In other words, the architectural decisions India makes today will have consequences for generations.
*The glass dream:*
On a hot afternoon, a glass-fronted office quickly becomes a study in contradictions: sunlight heats the interiors, blinds are drawn against glare, and air conditioners work overtime to keep the space cool.
Sugeet Grover of the Centre for Science and Environment's Sustainable Habitat Programme has seen this problem play out repeatedly.
"Glass in itself will allow direct heat to enter and, because of the greenhouse effect, will not allow the heat to exit," he says.
He also points to the heat reflected by glass buildings towards the ground, potentially adding to the discomfort of surrounding spaces. Inside, excessive daylight and glare can make occupants abandon natural lighting altogether.
The consequences extend well beyond comfort. Greater heat gain means greater dependence on air conditioning, which translates into higher electricity bills and a larger carbon footprint.
India's buildings consumed approximately 500 terawatt-hours of electricity in a recent year, according to Central Electricity Authority figures cited in the report. Of the 197.7 TWh mapped by BEE through its appliance and end-use programme, cooling accounted for 123 TWh, including room air conditioners, ceiling fans, and light commercial air-conditioning systems.
Kalyani Roy, a Kolkata-based conservation architect who works with heritage buildings, said the building envelope — the outer layer separating indoor spaces from the elements — is crucial to determining how much heat enters a structure.
In India's hot-dry and hot-humid regions, she explained, large glazed surfaces are particularly damaging. They let in heat, offer little insulation, and turn buildings into ovens.
*Why builders love glass:*
The economics are straightforward. A nine-inch brick wall replaced by a 6 mm glass panel frees up floor area, and in markets where commercial space fetches up to Rs. 25,000 per square foot, every recovered inch translates directly into revenue.
According to Rajneesh Sareen, director of sustainable habitat at the Centre for Science and Environment, on a 10,000-square-foot project, the switch can unlock nearly 1,000 additional square feet.
Sareen also links the preference for glass to the speed of construction. "Developers can complete a project much faster than they would have using traditional construction methods," he says. Glass also eliminates the biannual cycle of painting and plastering that traditional construction demands.
There is a functional argument too. When business process outsourcing companies began setting up operations in India in large numbers, the priority was dust-free, climate-controlled workspaces to protect sensitive equipment.
Glass facades also scream "luxury". They are quick to build, using prefabricated panels, and can cut construction time by 20 to 30 percent.
*How glass heats a city:*
Glass buildings heat urban environments through two simultaneous mechanisms. On the outside, reflective glass surfaces bounce and amplify sunlight, effectively doubling solar intensity at street level. Inside, solar heat is trapped greenhouse-style, forcing air-conditioning systems to work at full capacity.
Air conditioning is, at its core, a heat exchange process: the hotter a building's interior, the more heat it expels into the ambient air outside. The city absorbs what the building discards.
India's climate makes this a particularly damaging equation. Annual average temperatures are already high, and glass facades — designed for cooler, cloudier European climates — function as greenhouse chambers here, trapping heat rather than moderating it.
The result is the Urban Heat Island effect, whereby built-up areas become significantly hotter than surrounding rural regions because concrete, asphalt, glass, and burnt red clay bricks absorb heat during the day and release it slowly through the night.
A 2024 study published in _Nature Cities_ found that urbanisation alone amplified warming in Indian cities by around 60 percent, with rapidly expanding Tier-II cities witnessing some of the sharpest increases.
Deaths attributed to heatstroke and sunstroke in India rose from 804 in 2023 to 1,832 in 2024, an increase of 128 percent in a single year.
*What India forgot:*
Time was when Indian cities were built with materials and designs that had cooling at the heart of the plan. Monuments like the Red Fort in Delhi, the medieval quarters of Jaisalmer, and parts of old Hyderabad bear witness to this wisdom even today.
The traditional haveli was never just a display of wealth. It was a sophisticated machine for living. The courtyard, or _chauk_, acted as a natural thermal regulator. It created a convection current that pulled cool air through the ground-floor rooms while pushing hot air upward and out.
Old homes across North India used walls that were often two to three feet thick, built using Nanakshahi bricks and a mixture of lime, surkhi, and organic binders like jaggery or belgiri. This was not just about durability. It was about thermal mass.
In regions where summer temperatures cross 45 degrees Celsius, these thick walls acted as a buffer. It took nearly 12 hours for the heat of the afternoon sun to reach the interior. By then, the outside temperature had already begun to fall. The walls would slowly release the stored heat into the cooler night air. This phenomenon, known as thermal lag, kept indoor spaces naturally 5 to 8 degrees cooler than the outside.
Other features did the same work: _jaali_ screens that filtered light and allowed air to pass, deep verandas that shaded walls, sloping roofs that shed rain, and lime plaster that reflected heat.
Today, we build airtight boxes that trap heat, then spend lakhs of rupees on air conditioning to make them liveable.
*Two campuses in Gurgaon:*
The contrast is visible in Gurgaon. The Energy and Resources Institute (TERI) campus does not use air conditioning. Instead, it has been designed with air tunnels to cool the building by removing hot air and replacing it with fresh air. Trees surround the campus by design, and a new lab was designed around the trees rather than cutting any of them.
Then there is Cybercity, where multinational companies flaunt their brand names on top of glass-facade buildings. Every building is encased in glass, which makes the commercial hub a heat island. It is almost impossible to walk around the campus, as there are no trees, and during summer, the heat bounces off the pavements around the buildings.
They are close to each other, but from a design perspective, they might as well exist on different planets.
*The way forward:*
The solution is straightforward: India must realign architectural design with ecological and climatic realities. It is time to mandate stricter, climate-responsive building codes suited to regional needs — not a single code that applies uniformly from Ladakh to Lucknow.
Contemporary practice is already correcting course. The building envelope is being reconsidered and made smarter. Optimised window-to-wall ratios, high-performance insulated facades, and adaptive shading systems that respond to solar movement are replacing the default of glass-to-ground.
Insulated spandrel systems, natural stone, and thermally efficient cladding are gaining prominence. Terracotta rainscreens, GRC panels, and contemporary concrete _jaalis_ are being deployed as passive solar-control devices that create depth and texture while filtering harsh sunlight and cutting thermal loads.
As cities confront the Urban Heat Island effect, architecture is increasingly embracing biophilic design — courtyards, green roofs, shaded streets, and water bodies that cool the air.
Auroville's solar-conscious buildings blend mud walls with modern technology, slashing energy use by 70 percent. Kerala architects are using local bamboo and overhangs for monsoon-proof homes. Cities like Pune now mandate 30 percent shaded facades in new builds.
Although the Energy Conservation Building Code provides a broad framework for the use of glass facades, not a single state has enforced these norms in building plan approvals. Haryana, Delhi, and Uttar Pradesh have no clear guidelines on glass facade use, even as dozens of commercial high-rises come up every year.
If India persists in its addiction to shiny glass facades and indiscriminate air conditioning, its cities risk transforming from vibrant centres of life into overheated glass chambers — trapping their inhabitants in a permanent, costly, and ecologically catastrophic nightmare.
Glass boxes may dazzle, but they drain our pockets and our planet. India, with its monsoon rhythms and desert swings, needs architecture that breathes with the weather — not against it.
#India #Architecture #Glass #Concrete #Heat #Climate #UrbanHeatIsland #Energy #Buildings #Sustainability